1. Pre-treating the rim
Apply a suitable cleaning agent on the area where weight is to be applied. Wipe area clean and dry. Please note: Be sure to test the cleaning agent on a small area to ensure it will not damage the wheel‘s finish.
2. Select the correct adhesive weight size
Cut the adhesive weights or break them apart, depending on weight type, to obtain the correct amount of weight needed.
3. Applying the weights
Remove the tape backing and press the center of the weight exactly at the imbalance point. Please note: Do not touch the tape surface after peeling off the tape backing.
4. Securing the weight
Once the center of the weight is located at the imbalance point, press down on the full weight length working from the center to the left and right. Using firm hand pressure should be enough to secure the weight.